A water-based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. Can be used indoors and outdoors on multiple surfaces. It is touch dry in 30 minutes and re-coating time is approximately 2-3 hours. 1 litre covers approximately 12-14 square metres in 1 coat. 

Available in 8 colours: Black, White, Cream, Red, Blue, Green, Grey and Light Grey. Sizes 250ml, 500ml & 1 litre.

Also available in 50ml in Satin White, Black and Grey.

Main Features

• Water-based & quick drying in approximately 30 minutes
• Low odour
• Flexible satin finish
• Resists flaking and peeling
• No primer needed
• Can be used indoors and outdoors

 Where would I use this?

• Wood, metal, plastic & galvanised steel
• Tiles, glass, MDF & UPVC
• Plaster & Lead
• Melamine & Masonry
• Doors & window frames
• Wardrobes, dressers & side tables
• Tables & Chairs

Preparation

The surface must be clean and free from dust and any loose paint, wax, grease, dirt, fungal growth or solid matter likely to interfere with the adhesion of the paint. Do not apply to damp areas. Sources of damp should be eliminated before applying the paint. The product can be applied to surfaces without the need of a primer. However on metal improved protection will be achieved if an anti-corrosive metal primer such as Rustins Quick Dry Red Oxide Primer or Rustins Galvanised Primer is first applied. The product can also be applied directly to timber but a suitable primer such as Rustins Quick Dry Primer and Undercoat will help to reduce the appearance of the grain of the timber if this is important.

Application

 STIR WELL BEFORE USE Do not thin the product. Apply evenly by brush. One or two coats should be applied allowing 3-4 hours between coats in warm dry conditions. Cold damp conditions will significantly extend the drying times. Do not apply outdoors when foggy or likely to rain before the paint has dried.

Coats

 1 coat is usually sufficient. A second coat may be applied for improved durability.

Drying Time

Approximately 30 minutes, depending on temperature and humidity.

RE-coating Time

 Approximately 3-4 hours

Application Temp

Ideally 15-25°C. Do not apply if rain is imminent.

Coverage

12-14 sq.metres per litre 1 coat.

Maintenance

The surface may be washed with a mild detergent solution and a scrubbing brush and re[1]coated if necessary.

Compatibility

May be applied to a wide range of surfaces and paints but test for compatibility and adhesion if in doubt.

Settlement

STIR WELL BEFORE AND DURING USE.

Shelf-Life/Storage

Many years if stored in original tightly closed container in a cool dry place.

Hazards

Keep out of reach of children. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. A full Safety Data Sheet is available upon request or on Rustins Web site.

Clean – up

Remove excess product from brushes before cleaning. Clean brushes whilst wet with water.

Rustins – Expert finishes for wood and metal